Water when the power is out
Make water safe with no power and no signal.
You can make water safe to drink without the grid and without a connection. Public-health agencies list three methods: boiling, chemical disinfection and filtration. Boiling is the most reliable. This page summarises what they say and links the source, so you can read the exact procedure rather than trust a paraphrase.
01Methods
The three methods, and what each is for
Summarised at a safe level. The exact figures are in the cited source.-
Most reliable
Boiling
The CDC describes boiling as the best way to kill disease-causing germs. Bring clear water to a rolling boil for one minute, then let it cool. The EPA extends that to three minutes above about 6,500 feet. If the water is cloudy, let it settle and filter it through a clean cloth first.
-
When you cannot boil
Chemical disinfection
Unscented household chlorine bleach can disinfect water when boiling is not possible. The EPA publishes the exact quantity by water clarity and bleach strength. It does not reliably kill the parasites Cryptosporidium and Giardia, which is why the CDC prefers boiling where you can.
-
Clearing and polishing
Filtration
Filtering through a clean cloth, coffee filter or paper towel removes sediment and cloudiness before you boil or disinfect. A filter rated for the job can also remove some parasites. Filtering first makes the other two methods work better.
The CDC is explicit: water contaminated with fuel, toxic chemicals or radiological material cannot be made safe by boiling or disinfection, and boiling can concentrate some chemicals. If you know or suspect chemical contamination, use bottled water or a different source. These methods are for germs, not chemicals.
02Before
Storing beats treating
The cheapest clean water is the water you already have.Ready.gov, from the U.S. Department of Homeland Security, recommends storing at least one gallon of water per person per day, for drinking and sanitation, with more for children, nursing mothers, people who are ill, and hot climates. Treatment is the fallback for when that stored supply runs out, not the first plan.
The World Health Organization frames why this matters: safe drinking water is a baseline for health, and it is the thing that goes wrong first when infrastructure fails. Knowing the procedure before you need it is the whole point of carrying a reference.
03How
How SurvivalOps keeps this to hand
The manual on the phone, not a half-remembered rule.Water is the part of preparedness that goes wrong first and matters soonest. The library holds water manuals as whole documents on the phone. Ask it how to treat water with no power and it searches those documents on the device, answers from the passages it found, and names the page so you can open the exact procedure and read the numbers as the agency wrote them.
Exact figures, like boil times and bleach quantities, are the kind of thing the app is built to quote rather than reword. How the collection is built is on the library page, and the path a question takes with the radios off is on how it works offline.
04Questions
Common questions
Short answers, with the source to read in full.Can you purify water with no electricity or internet?
Yes. Public-health agencies list three methods that need no grid power and no connection: boiling, chemical disinfection, and filtration. The CDC describes boiling as the best way to kill germs in water.
None of these methods needs the internet, which is the point of keeping the procedure on a phone you can read offline.
How long should you boil water to make it safe to drink?
The CDC says to bring clear water to a rolling boil for one minute, then let it cool before use. The EPA adds that at elevations above about 6,500 feet you should boil for three minutes.
If the water is cloudy, let it settle and filter it through a clean cloth or paper towel first. Read the cited source for the full procedure.
Does boiling remove chemical contamination?
No. The CDC warns that water contaminated with fuel, toxic chemicals or radiological material cannot be made safe by boiling or disinfection, and boiling can concentrate some chemicals.
If you know or suspect chemical contamination, use bottled water or a different source. Boiling and disinfection are for germs, not chemicals.
How much water should you store for an emergency?
Ready.gov recommends storing at least one gallon of water per person per day, for drinking and sanitation, with more for children, nursing mothers, sick people and hot climates.
Storing water is simpler and safer than treating it, so treatment is the fallback for when the stored supply runs out.
05Sources
Sources
Public institutions, linked so you can read them in full.- U.S. Centers for Disease Control and Prevention, How to Make Water Safe in an Emergency. Source: cdc.gov/water-emergency/about/index.html
- U.S. Centers for Disease Control and Prevention, Fact Sheet: Make Water Safe During an Emergency. Source: cdc.gov/water-emergency/communication-resources
- U.S. Environmental Protection Agency, Emergency Disinfection of Drinking Water. Source: epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water
- Ready.gov, U.S. Department of Homeland Security, Water. Source: ready.gov/water
- World Health Organization, Drinking-water fact sheet. Source: who.int/news-room/fact-sheets/detail/drinking-water
06Next step
Want to know when it is ready
One email when there is something to try. Nothing else.SurvivalOps is in a private alpha. There is no price and no release date yet. When there is a build to try, the people on the list hear first.